ETERNOIVICA PEDESTAL FLAT HEAD

ETERNOIVICA PEDESTAL FLAT HEAD is a wingless, two-component head made of polypropylene and white rubber with a non-slip and noise-reducing function, for use with ETERNOIVICA’s PEDESTAL outdoor raised floor supports. The absence of fins allows this head to be placed below the plates to be supported. Placing them exactly in the centre of the plates increases the load-bearing capacity of the finished floor and the degree of safety.

Special two-component fixed head

The adjustable ETERNO IVICA PEDESTAL NM supports are equipped with a special two-component fixed head with a white rubber top, which has a noise- and slip-resistant function. These features provide greater solidity to the finished floor and prevent the generation of annoying noises from the contact between the plates and the support head. This also reduces the transmission of impact noise from the walking surface to the rooms below.

Adjustable support…proficient

The head height is adjustable, so that the desired height for the raised floor can be achieved, even when the floor is finished with the unique red adjustment key. The adjustable supports of the PEDESTAL NM line offer the opportunity to have a safely finished floor due to their solidity. Heights greater than 270 mm are achieved with NM supports in combination with the corresponding extensions, which can be installed up to a maximum of 5 units. Through the adjustment of NM supports you can have a perfectly level floor and compensate for any slope or unevenness of the roof slab. Support that can be used in conjunction with “TWIST 110” slope compensators to be inserted on the head to bring the walking surface always level.

Maximum performance, convenience and practicality

Maximum performance, convenience and practicality: ETERNO IVICA supports offer safety and durability, minimizing maintenance costs over the life of the raised floor. They make any work to replace the supports, or the plates installed on top of them, simple and straightforward. The smooth support base of 320 cm2 provides resistance to loads (certified) up to 3118 kg/m2. Supporting installation of the plates on the head of the supports allows the removal of individual elements, in whatever position they are, without the need to work on the perimeter. This allows easy and quick maintenance of the underlying layers.

70% recycled and 100% recyclable materials

ETERNO IVICA PEDESTAL is made of PP from 70 per cent recycled plastic material, which in turn is 100 per cent recyclable, weather- and frost-resistant, acid-resistant, ageing-resistant and UV-resistant. This characteristic makes it one of the most sustainable products on the market, with minimal impact from the standpoint of energy consumption for its production and related emissions of pollutants into the atmosphere. In addition, they guarantee superior durability throughout their entire useful life.