STEEL TRAVERSE H18MM

TRAVERSO ACCIAIO H18MM is a 1.2 mm thick steel reinforcing crossbar, rectangular tubular section, useful for the installation of panels with dimensions 600×600 mm, to increase the load-bearing capacity of the finished floor in indoor raised floors. With non-conductive gasket included. The crossbar must be fitted into the intended seat on the head of the adjustable support, snapping it in and, if necessary, hitting it to snap it into place. Then simply lay the floor panels over the heads of the supports and the system will be assembled as usual and ready to be walked on.

Adjustable support… in a workmanlike manner

The head height is adjustable so that the desired height can be achieved for the indoor raised floor. The adjustable supports of the M16/1 line offer the opportunity to have a finished table from a minimum of 35 mm up to a maximum of 1090 mm safely. There are four types of support used to achieve the desired heights and they differ in terms of the shape and area of the base, the position of the hollow or threaded tube and threaded column in relation to the head and base, and the presence or absence of anti-unscrewing nuts. By adjusting the M16/1 supports, you can have a perfectly flat floor ready for the installation of encapsulated panels, which can then be covered with self-laying coatings, or panels with a core and permanent top coating.

Floors walkable immediately, coatable after completion of work

Encapsulated panel technology has the tremendous advantage of being able to create floors that can be walked on immediately, and can be covered after the work is completed. In fact, one of the big problems associated with indoor flooring is its implementation and subsequent maintenance in the best state, until the end of site work. The use of encapsulated steel sheet panels enables the creation of walkable floors on the construction site, which can be soiled and scored. In fact, once all the site work is finished, it will be very easy to cover the encapsulated floor with self-laying coatings to give the finished floor the finish you want. In fact, there are numerous alternatives for indoor floor coverings, which, thanks to their self-laying technology, allow them to be laid directly at the end of construction work, preserving their finish and quality until the spaces concerned are open to the public.